List of compatible laser equipment

As part of our mission to continually expand the functionality of the SGBELT feeder, we cordially invite manufacturers, distributors, resellers, and customers to share detailed technical information on connecting their marking devices to our feeder. This will allow solution providers to create a compatibility list that will simplify customer selection and integration, and for end customers, it will facilitate quick connection of the feeder to their existing device.

Thanks to the collected information, users who order the feeder can specify the laser type and equip the feeder with the correct, ready-to-use connection cable.

Examples of Compatible Devices

Below are suppliers who have shared their specifications, allowing us to integrate their products with the SGBELT feeder. Devices currently on our list include:

CMS Laser Marker – https://lasery.pl/Znakowarka-laserowa-CMS
Mini Laser Marker – https://lasery.pl/mini-znakowarka-laserowa
EM-Smart Laser Markers (all models) – https://emsmartlasers.com/pl/
Flux Promark Laser Marker
Lasertechnik START Series Laser Markers – https://lasertechnik.pl/znakowarki
Cloudray MP Series Laser Markers
Trotec SpeedMarker FL Laser Markers
Fine Laser ZF-K Marker https://www.grawcom.com/produkty/znakowarki-laserowe/83-znakowarka-laserowa-fiber-finelaser-zf-k.html
Top Laser Fiber Markers https://toplaser.pl/znakowarki-laserowe/122-znakowarka-grawerka-laserowa-fiber-laser-20w-raycus-15×15-cm.html

If your laser manufacturer or supplier isn’t listed, please contact us by filling out the attached form. This will allow us to select the correct laser-feeder connection.

The available port types are specified in the form, which must be completed before ordering. Selecting the appropriate port will ensure that the feeder is equipped with the correct connection cable. We’ll discuss these ports further in this article.

Required Information for Connecting to the SGBELT

The SGBELT feeder can connect via two main methods. Please document how your devices implement these scenarios:

Foot Pedal Control: What signals and connectors are used to trigger the laser beam using an external switch (such as a foot pedal)?

In this mode, the marking time is controlled by the SGBELT feeder. Ideal for repetitive runs with repeatable marking.

Laser Control (Full Control): What signals and connectors are used to control the laser?

In this mode, the feeder reads the marking-complete signal and controls the marking trigger signal after the next item is moved. This enables high-volume marking with personalization or variable data, where the feeder pause time is automatically adjusted.

Types of connections we need:

Dedicated connection (laser and assigned socket): Specifications of the connection socket on your device.
Universal connection: Information about your laser’s output signals, which can be connected to our universal adapter.
Next steps

Please complete the interactive form to discuss and submit the necessary technical specifications. Additional information included in the document, such as the working area height, will further simplify adapting the feeder to your laser. We look forward to expanding our “Compatibility List” to include your products.

You can download the form here!